The Gang programmer, GW-PRO2, is a series of production quality 8-gang programmers for the Samsung OTP and MTP microcontrollers of SAM4 (S3P7xxx), SAM8 (S3P8xxx, S3P9xxx), Calm RISC (S3FBxxx, S3FKxxx) and ARM7 (S3F4xxx, S3F3xxx) family.

The Gang programmer consists of a master unit (GW-PRO2) which connects to various programming adapter sockets for programming all of OTP or MTP devices with a different package. The GW-PRO2 programmer holds the data and parametric information to be copied new devices. Once the data resides inside the buffer memory of GW-PRO2, it will be stored securely and is protected from accidental modifications with its secured functions. Data in the GW-PRO2 can be changed by downloading from a PC or by reading a chip in the master socket.

Features and Specifications

• Program up to 8 devices at one time
  
• Very fast programming speed :Program speed is 2K byte(OTP mode) and 5K byte(MTP) steps per second including verification operation.
  
• Supports all Samsung serial type OTP and MTP devices of SAM4(S3P7xxx) and SAM8(S3P8xxx, S3P9xxx), Calm RISC (S3FBxxx, S3FKxxx) and ARM7/9 (S3F4xxx series) families via different programming adapters.( Programming adapter sockets are sold separately )
  
• Supports MTP devices with 3.3V and 5.5V operating voltage
  
• Individual socket LEDs indicate blank or verification result
  
• 340(mm) x 230(mm) x 50(mm), 2.2Kg Weight
  
• Data to be programmed is stored inside the flash memory of the GW-PRO2 and remains intact during power down. This feature is useful to move it to the production site after downloading data from the host PC and setting up the operation mode in the design lab
  
• Maximum buffer memory is 1Mbyte (1024 Kbytes)
  
• Auto verification of devices and the buffer memory in the stand-alone mode
  
• Selectable program mode (Auto read protection, LDC protection, Hard lock)
  
• The total number of pass and failed device after programming is displayed and remains during power down
  
• Buzzer sounds after programming finished( On/Off selectable )
  
• Complies to manufactures' programming specifications

Package

1. GW-pro2 main body/1ea
   
2. RS232Cable/ 1ea
   
3. .User ' s Manual/1ea
   
4. GW-pro2 Installation CD/1ea
   * Note: GW-pro2 package doesn ' t include a gang socket adapter (sold separately)